Two kids are walking together as the cherry blossom petals fall. After the girl reveals that the falling speed of a cherry blossom petal is 5 centimeters per second, she runs toward a train crossing and quickly crosses it. On the other side of the lowered crossing, she makes a promise to the boy that they will see the cherry blossoms together next year.
Takaki Tono is a junior high school student in Tokyo in 1995. The very first scene of the movie features Takaki and Akari when they both lived in Tokyo. While playing under the cherry blossom trees, Akari informs Takaki that cherry blossoms fall at a rate of 5 centimeters per second. After impressing him with that fact, Akari tells Takaki that they should see the cherry blossoms together again the next year.
5 Centimeters Per Second English Sub 1080p Hd
- Readings from 2 marks to the right of zero to 2 marks to the left of zero on the scale of the meter of the electronic unit shall correspond to the nominal value of the gap between the inner surface of the launch canister and the outer surface of the second stage of the missile, which is 17.1 centimeters;
- Readings from 28 marks to the right of zero to 28 marks to the left of zero on the scale of the meter of the electronic unit shall correspond to movements of the lever arm of no more than 1.4 centimeters upward and no more than 1.4 centimeters downward, respectively, from the nominal value of the gap between the inner surface of the launch canister and the outer surface of the second stage of the missile;
- The sizes of the areas observed in the confirming fields of view through the telescopes of the left and right optical channels when an object is placed at a distance from the stage measuring device corresponding to the nominal value of the gap between the inner surface of the launch canister and the outer surface of the second stage of the missile shall be 1.9 plus or minus 0.2 centimeters from the triangular fiducial mark in each direction along the longitudinal axis of this device and shall be no less than 1.0 centimeter in the direction perpendicular to this axis;
- The size of the area observed in the observing field of view through the telescope of the right optical channel when an object is placed at a distance from the stage measuring device corresponding to the nominal value of the gap between the inner surface of the launch canister and the outer surface of the second stage of the missile shall be no less than 12.0 centimeters in diameter and the size of the area observed in the observing field of view through the telescope of the left optical channel when an object is placed at such a distance shall be no less than 9.0 centimeters in diameter;
- The lengths of the three calibration gauges simulating gaps between the inner surface of the launch canister and the outer surface of the second stage of the missile of 15.9 centimeters, 17.1 centimeters and 18.3 centimeters, shall be 15.7 centimeters, 16.9 centimeters and 18.1 centimeters, respectively.
(i) The inspected Party, having implemented the procedures contained in subparagraphs (c)(ii) and (c)(iii) below, shall ensure that the inspecting party receives an image of the top and bottom of the missile along the entire cylindrical length of the second stage of an SS-25 missile (307 centimeters), plus 25 centimeters on the side where the imaging begins and 7 centimeters on the opposite side. The image obtained shall be limited to the areas between the top and bottom of the outer surface of the launch canister and lines 69.5 centimeters on either side of the missile center line. The inspected Party assures the inspecting Party that the image described above meets the following conditions:
- The image obtained shall show the four points where the curvatures of the end sections of the Ss-25 missile second stage motor casing intersect with the lines 69.5 centimeters on either side of the missile center line.
(vi) The inspection team leader shall designate members of the inspection team who shall be permitted to observe, through the telescopes, the position of the triangular fiducial marks with respect to the shiny metal bands on the joints of the second stage of the missile. These inspection team members shall observe the areas of the joints of the second stage of the missile through the telescopes and shall record the similarities and differences between the areas observed through the telescopes and the areas of the joints of the second stage of the SS-25 missile shown in the photographs in the technical documentation. During the course of this observation, these inspection team members shall be permitted to move the stage measuring device no more than 3 centimeters forward and no more than 5 centimeters back from the position specified in subparagraph (j)(v) above. The inspection team members then shall realign the stage measuring device so that the triangular fiducial mark in the confirming field of view of the left telescope again is centered on the shiny metal band. The inspection team members then shall observe whether all or part of the other shiny metal band is within the conforming field of view of the right telescope. If all or part of the other shiny metal band is observed within the confirming field of view of the right telescope, then the length of the second stage of the missile is from 304 centimeters to 307 centimeters. The positions of the triangular fiducial marks with respect to the shiny metal bands observed within the confirming fields of view of both telescopes shall be recorded.
(xi) To measure the gap between the inner surface of the launch canister and the outer surface of the second stage of the missile, the inspection team members shall release the lock of the lever arm of the stage measuring device. Gap measurements shall be taken by the inspection team members at the position that corresponds to the position of this device specified in subparagraph (j)(v) above and at three additional positions selected by the inspection team members over a one-meter interval from that position. Readings on the scale of the meter of the electronic unit from 28 marks to the right of zero to 28 marks to the left of zero shall correspond to a diameter of the second stage of the missile from 153.0 centimeters to 158.6 centimeters. The inspection team members shall be permitted to ascertain that the roller on the lever arm is touching the outer surface of the second stage of the missile at each of these gap measurement positions by observing the rotation of the roller on the lever arm as the inspection team members move this device in the launch canister no more than 3 centimeters in each direction from each gap measurement position. 2ff7e9595c
Comments